Arcol Hyena v1.1

Available at: http://shop.arcol.hu/item/hyena

History (v1.0)

For previous v1.0 announcement, read here:
http://blog.arcol.hu/?p=1920
and here:
http://www.thingiverse.com/thing:22369

V1.1 update

This is a minor, but really handy upgrade to hyena.

At one end it has 6mm flats for wrenches. So no more pliers to holding while putting the big gear onto the shaft.

This is how it should be mounted (flat end is the opposite one from big gear):

Here is a closeup of the two flat sides:

Here is how you should put the big gear onto the hyena:

Also here it is mounted on the extruder pusher:

(Note the M8 nut with M3 grubscrew! It is *really* useful)

Hyena: http://shop.arcol.hu/item/hyena
M8 nut with M3 grubscrew: http://shop.arcol.hu/item/m8nutm3

—-
I closed down the commenting on this webpage due to the enormous number of penis enlargement suggestions.

If you have any thoughts to share about this article, please discuss it on arcol.hu's mailing list,
in this thread.